You sent the drawing to six Chinese factories. Four never replied. Two replied with the same sentence: MOQ 50,000 pcs. You need 4,000.
That gap is why most importers give up on custom fasteners and settle for a standard part that almost fits. It is also the exact order size we build for. Yiwan Hardware is a low-MOQ custom fastener factory in Yueqing, Zhejiang, producing rivets, semi-tubular rivets, screws, nuts, pins, cold-forged parts and CNC-turned components for importers, distributors and OEM buyers who order in thousands rather than truckloads.
Why most fastener factories quote you 50,000 pieces
The refusal is not arrogance. It is machine economics, and understanding it will make you a better buyer.
A high-volume fastener plant runs multi-die cold heading lines built to push out parts by the million. Every job on that line carries the same fixed cost regardless of quantity: die design, tooling fabrication, machine setup, first-article inspection, then a teardown when your job ends. On a 500,000-piece run those hours disappear into a fraction of a cent per part. On a 4,000-piece run they dominate the quote. The factory does the arithmetic, sees a setup-heavy job blocking a line that could be earning volume money, and either declines or quotes a number designed to make you go away.
So the question worth asking a supplier is not “can you do low MOQ.” Everyone says yes. The question is what equipment will my small order actually run on — because that answer decides whether your price is real or a favor that gets quietly deprioritized.
The mechanism: routing small orders to the right machine
Our workshop is deliberately mixed rather than specialised. It integrates multi-station cold upsetting, CNC lathes, Taiwan automatic machines, Ningbo automatic machines, manual instrument lathes and punch presses under one roof.
That mix is the whole reason a small order works here. A 3,000-piece stainless semi-tubular rivet does not need to sit in the queue behind a cold-heading job. It can run on an automatic machine or an instrument lathe, where setup is measured in hours instead of days and where tooling is often a ground insert rather than a full die set. A complex head geometry that would demand expensive progressive dies at volume can be turned instead. Once the part proves itself and your reorder volume climbs, we move the same drawing onto cold forging, where the unit price drops sharply because now the tooling amortises.
Same drawing, different route, priced for the quantity in front of it. That is what a genuinely low-MOQ fastener factory looks like from the inside.
What we make
| Category | Typical parts | Common materials |
|---|---|---|
| Rivets | Solid rivets, semi-tubular rivets, stainless steel semi-tubular rivets, shoulder rivets, blind-hole rivets | Stainless 304/316, carbon steel, brass, copper, aluminium |
| Screws & bolts | Non-standard screws, shoulder screws, stepped screws, special-head and special-drive screws | Carbon steel, stainless, brass |
| Nuts | Non-standard nuts, insert nuts, knurled nuts, thin nuts | Carbon steel, stainless, brass |
| Pins & shafts | Dowel pins, stepped pins, grooved pins, hinge pins, custom shafts | Stainless, carbon steel, alloy steel |
| Cold-forged parts | Contacts, terminals, studs, custom cold-headed blanks | Copper, brass, steel, stainless |
| CNC / turned parts | Precision turned components, bushings, adaptors, machined hardware | Stainless, brass, aluminium, steel |
| Assemblies & niche hardware | Door lock parts, electrical hardware components, auto parts | Mixed |
If your part sits between two of these rows — a rivet with a machined shoulder, a screw with a punched washer captive on it — that hybrid is normally where a single-process factory says no and a mixed workshop says send the drawing.
Minimum order quantity is confirmed for each part after reviewing the drawing, material, tooling requirements and order volume. Non-standard geometry, special materials and plating requirements can affect the practical batch size.
The honest economics of a small custom order
Three things importers should expect from any low-MOQ supplier, including us.
Unit price will be higher than volume pricing. That is not a markup, it is amortisation. Ask for a price ladder across several quantities in your first RFQ. Seeing where the curve flattens tells you your real reorder quantity, and it costs the supplier nothing to give you.
Tooling may be charged separately. Get it in writing: what the tooling costs, who owns it, and whether it is stored for reorders. A one-line answer here separates a factory from a trading company reselling someone else’s line.
Sampling comes before production, always. A sample run confirms head fill, thread fit, hardness, plating adhesion and the dimension your assembly actually cares about. Skipping it to save two weeks is the most expensive shortcut in fastener sourcing.
What to send us for a quote in 24 hours
Most delayed quotes are delayed because the enquiry was incomplete and the factory had to guess. Send these and the guessing stops:
- Drawing or dimensioned sketch — PDF, DWG or STEP. A hand sketch with dimensions is genuinely enough to start.
- Sample photo with a caliper or ruler in frame, if you have the physical part.
- Material and finish — or the environment the part lives in, and we will suggest one. Salt spray hours matter more than a plating name.
- Quantity for this order, plus estimated annual usage. The second number often improves the first number’s price.
- The critical dimension or function — what the part must do, what previously failed. This is where a factory adds value instead of just copying a drawing.
- Target price or the price you pay today, if you can share it. It tells us which process to route your part through instead of quoting blind.
Send your drawing through our inquiry form or contact us on WhatsApp (+86 18066365397). We will reply to your inquiry within 24 hours. Sample and production schedules are confirmed during quotation after reviewing the drawing, materials, process and quantity.
Vetting any low-MOQ fastener supplier, ours included
Copy this into your supplier checklist. It works on us and on every competitor you are also emailing.
- Ask what machine your part runs on. A supplier who cannot name the process is quoting from a spreadsheet, or subcontracting without telling you.
- Ask for a video walk of the workshop, not a photo pack. Photos are shareable between trading companies; a live walk showing your material on the floor is not.
- Request material certification and dimensional report with the sample. If they hesitate on paperwork at sample stage, production will be worse.
- Test the reply on a hard question. Ask what they would change about your drawing to reduce cost. A real factory has an opinion. A reseller says “we can make exactly as your drawing.”
- Start with one small paid order before the big one. A 3,000-piece trial is the cheapest supplier audit available, and it is the whole reason a low-MOQ factory is useful even when your eventual volumes are large.
FAQ
What is your minimum order quantity for custom fasteners? It depends on the process. Turned and automatic-machine parts carry the lowest minimums; cold-forged parts need more volume before the tooling makes sense. Send the drawing and we will quote the MOQ with the price rather than quoting a blanket number.
Can you make non-standard parts from a drawing only, with no sample? Yes. A dimensioned drawing with tolerances and material is enough. Where the drawing is ambiguous we come back with questions before quoting, which is slower to answer and much cheaper than remaking 4,000 parts.
Do you charge for tooling on small orders? Sometimes, depending on whether existing tooling can be adapted. It is stated separately in the quote, never hidden inside the unit price.
Can you supply mixed items in one shipment? Yes. Consolidating several part numbers — rivets, pins, custom screws — into one order and one shipment is the normal way importers reach a workable order value without overstocking any single part.
Do you work with importers and distributors, or only OEM factories? Both. Importers and hardware distributors are a core part of our customer base, and neutral packaging or your own labelling is available on request.
Where are you located and can we visit? YIWAN is based in Dongfang Village, Wengyang Street, Yueqing City, Zhejiang, China. Factory visits can be arranged in advance. Contact us with your proposed date and the parts you would like to discuss.
Start with one drawing
You do not need a sourcing strategy to begin. You need one part that has been annoying you — the rivet you overpay for, the screw your assembly line keeps rejecting, the pin nobody will quote in your quantity.
Send that drawing today. You will get a price, a process, an MOQ and an honest opinion about your design.
Send YIWAN your drawing or contact us on WhatsApp (+86 18066365397).